ASTM A710 Steel Capillary, grade B

ASTM A710 Steel Capillary, grade B, 13 - 19 mm thicknesses Product Information -:- For detailed product information, please contact sales. -: ASTM A710 Steel Capillary, grade B, 13 - 19 mm thicknesses Synonyms -:- For detailed product information, please contact sales. -:

ASTM A710 Steel, grade B, 13 - 19 mm thicknesses Product Information -:- For detailed product information, please contact sales. -: ### **Product Datasheet: ASTM A710 Grade B High-Strength Low-Alloy Steel Plate** #### **Product Overview** ASTM A710 Grade B is a high-strength, low-carbon copper-precipitation-strengthened, low-alloy steel. Its unique "age-hardening" heat treatment allows it to achieve very high strength and excellent toughness without requiring a conventional quench and temper process. This makes it exceptionally well-suited for applications where welding is critical, as it minimizes the risk of heat-affected zone (HAZ) cracking. Plates in the 13 mm to 19 mm thickness range deliver an optimal balance of high strength and fabrication ease. **Key Advantages:** * **High Strength & Toughness:** Offers a minimum yield strength of 585 MPa (85 ksi) with exceptional impact toughness at low temperatures. * **Superior Weldability:** The low carbon content (Carbon Max 0.07%) significantly reduces preheat requirements and eliminates post-weld heat treatment in most cases, even at this strength level. * **Age-Hardening:** Gains its strength from a solution treatment and aging process, resulting in a more uniform microstructure. * **Excellent Corrosion Resistance:** The specified copper content provides enhanced resistance to atmospheric corrosion. --- #### **International Standard** The manufacturing and testing of this product are strictly in accordance with the latest version of: * **ASTM A710 / A710M:** Standard Specification for Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates. --- #### **Chemical Composition (Heat Analysis, %)** The following table details the required chemical composition for ASTM A710 Grade B. | Element | Content (%) | Element | Content (%) | | :--- | :--- | :--- | :--- | | Carbon (C), max | 0.07 | Nickel (Ni) | 0.70 - 1.00 | | Manganese (Mn) | 0.40 - 0.80 | Chromium (Cr) | 0.40 - 0.80 | | Phosphorus (P), max | 0.025 | Molybdenum (Mo)| 0.15 - 0.25 | | Sulfur (S), max | 0.025 | Columbium (Cb) [Niobium] | 0.02 - 0.08 | | Silicon (Si), max | 0.40 | Copper (Cu) | 1.00 - 1.30 | | *Note: Columbium (Cb) is also known as Niobium (Nb).* | | | | --- #### **Mechanical Properties (For Thickness 13 - 19 mm)** Mechanical properties are guaranteed in the transverse direction. | Property | Value | Unit | | :--- | :--- | :--- | | **Tensile Strength, min** | 620 | MPa (90 ksi) | | **Yield Strength (0.2% Offset), min** | 585 | MPa (85 ksi) | | **Elongation in 2 in (50 mm), min** | 20 | % | | **Reduction of Area, min** | 50 | % | **Impact Properties (Charpy V-Notch):** * **Test Temperature:** -85°F (-65°C) * **Minimum Average Impact Energy:** 34 J (25 ft·lb) --- #### **Physical Properties (Typical Values)** * **Density:** 7.85 g/cm³ (0.284 lb/in³) * **Modulus of Elasticity:** 200 GPa (29,000 ksi) * **Poisson's Ratio:** 0.29 * **Coefficient of Thermal Expansion:** 11.5 x 10⁻⁶/°C (20-100°C) --- #### **Heat Treatment Condition** This product is supplied in **Class 3 (Aged)** condition, which involves: 1. **Solution Treatment:** Heated to a high temperature to put alloying elements into solid solution, followed by rapid cooling. 2. **Aging:** Heated to a moderate temperature for a specific time to precipitate fine alloy particles (e.g., copper), which strengthens the steel. This process is fundamental to achieving the steel's unique combination of properties. --- #### **Product Applications** ASTM A710 Grade B is ideal for critical, high-performance applications where weldability, toughness, and weight savings are paramount. * **Pressure Vessels & Reactors:** For high-pressure gas storage, chemical processing, and power generation. * **Offshore & Marine Structures:** Platform components, ship hulls, and superstructures requiring high strength and corrosion resistance. * **Cryogenic Applications:** Containment systems for liquefied gases (LNG, nitrogen) due to its exceptional low-temperature toughness. * **Construction Equipment:** Booms, arms, and frames for cranes and excavators where fatigue resistance is critical. * **Military & Aerospace:** Structural components that benefit from its high strength-to-weight ratio. --- #### **Fabrication & Welding Notes** * **Welding:** This is a key advantage of A710 Grade B. Due to its very low carbon equivalent, it can often be welded without preheat. However, standard low-hydrogen welding practices (e.g., SMAW, GMAW, FCAW with low-H₂ electrodes) are mandatory. For highly restrained joints or very low ambient temperatures, a minimal preheat of 50-100°F (10-38°C) may be recommended. * **Post-Weld Heat Treatment (PWHT):** Generally not required. The aging temperature is low enough that it does not adversely affect the base metal properties after welding. * **Cutting & Forming:** Can be cut by plasma arc, laser, or waterjet. It has good formability due to its low yield-to-tensile ratio. --- **Disclaimer:** This datasheet is for informational purposes only. The information provided is typical and should not be used for design or specification purposes. Always consult the official ASTM A710 standard and your steel supplier for the most accurate and project-specific data, especially regarding welding procedure specifications (WPS). -:- For detailed product information, please contact sales. -: ASTM A710 Steel, grade B, 13 - 19 mm thicknesses Specification Dimensions Size： Diameter 20-1000 mm Length <4153 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: ASTM A710 Steel, grade B, 13 - 19 mm thicknesses Properties -:- For detailed product information, please contact sales. -:

Applications of ASTM A710 Steel Capillary, grade B, 13 - 19 mm thicknesses -:- For detailed product information, please contact sales. -: Chemical Identifiers ASTM A710 Steel Capillary, grade B, 13 - 19 mm thicknesses -:- For detailed product information, please contact sales. -:

Packing of ASTM A710 Steel Capillary, grade B, 13 - 19 mm thicknesses -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Capillary drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 624 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition