Bismuth Lead Alloy,CAS RN: N/A
Product Code : EBi-A75-CU-CU
HANG JI specializes in producing high purity Bismuth Lead Alloy,CAS*: N/A with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N,6N5, and in some cases up to 99.99999% (7N),99.999999% (8N),HANG JI produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas .Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.Additional technical, research and safety (MSDS) information is available,
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
CAS #: N/A
Linear Formula: Bi Pb
MDL Number: MFCD00801141
EC No.: N/A
-:-
-:- ：--- For detailed product information, please contact sales.
-:-
Synonyms: :----------------
Lead-Bismuth Eutectic, LBE, Bi-Pb, Pb-Bi, BiPb, PbBi, CAS 12048-28-1, Lead bismuthide, MCP Alloy 124, Metspec 255
Compound Formula: PbBi
Appearance: Metallic solid in various forms (plate, bar, sheet, strip, billet, wire, pipe, tube, ribbon, powder)
Melting Point: 124-130 °C
Boiling Point: 1670 °C
Density: 10.44 g/cm3
Solubility in H2O: Insoluble
Tensile Strength: 44.1 MPa
Thermal Conductivity: 4 W/m·K
Specific Heat: 0.126 J/g·°C (20 °C)
Heat of Vaporization: 850-870 kJ/kg
Health & Safety Information
Signal Word: N/A
Hazard Statements: N/A
Hazard Codes: N/A
Risk Codes: N/A
Safety Statements: N/A
Transport Information: NONH for all modes of transport
Chemical Identifiers
Linear Formula: Bi Pb
Pubchem CID: 6336552
MDL Number: MFCD00801141
IUPAC Name: bismuth; lead
SMILES: [Pb].[Bi]
InchI Identifier: InChI=1S/Bi.Pb
InchI Key: UDRRLPGVCZOTQW-UHFFFAOYSA-N
-:- ：--- For detailed product information, please contact sales. ：--- Packing of
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 514 gallon liquid totes Special package is available on request.
