Assab Steel Sheet,Plates, ASSAB 88 Cold Work Steel Sheet,Plate

Assab Steel Sheet/Plates ASSAB 88 Cold Work Steel Sheet/Plate Product Information -:- For detailed product information, please contact sales. -: Assab Steel Sheet/Plates ASSAB 88 Cold Work Steel Sheet/Plate Synonyms -:- For detailed product information, please contact sales. -:

Assab Steels ASSAB 88 Cold Work Steel Product Information -:- For detailed product information, please contact sales. -: ### **Product Datasheet: Assab Steels ASSAB 88 Air-Hardening Cold Work Die Steel** **Assab Steels ASSAB 88** is a premium, multi-purpose chromium-molybdenum-vanadium air-hardening cold work die steel, developed to offer an outstanding balance between high wear resistance and good toughness. It is considered a versatile and highly reliable upgrade over many conventional grades, designed to deliver longer tool life, better performance under stress, and reduced risk of cracking in demanding applications. #### **1. Key Characteristics & Advantages** * **Excellent Balance of Wear Resistance & Toughness:** Optimized alloy composition provides superior wear resistance compared to standard grades like A2 or D2, while maintaining better toughness than high-carbon, high-chromium steels. This leads to less chipping and longer service life. * **High Compressive Strength:** Capable of withstanding very high pressures without deformation, making it ideal for forming, coining, and stamping applications. * **Good Dimensional Stability:** As an air-hardening steel, it exhibits minimal distortion and predictable size change during heat treatment, crucial for precision tools and progressive dies. * **Deep & Uniform Hardenability:** Can be through-hardened in large cross-sections with consistent properties from surface to core. * **Good Machinability & Polishability:** Offers better machinability in the annealed state and can achieve an excellent polished surface finish compared to many high-alloy tool steels, which is vital for plastic molding and fine blanking applications. #### **2. Standard Specifications & International Designations** * **Assab / Uddeholm:** **ASSAB 88** (Proprietary Grade) * **Similar/Equivalent Grades:** * **AISI / ASTM:** Modified A8 type / Similar to S7 but with higher wear resistance. * **DIN / EN:** ~1.2367 / 1.2606 (Not direct equivalents, but in a similar performance class). * **JIS:** SKD11 (Generally outperforms SKD11 in toughness). * **Note:** ASSAB 88 is a proprietary grade, often specified by brand name. It does not have a direct, universal AISI or DIN equivalent, but is frequently compared to and used as a superior alternative to **A2 (DIN 1.2363)** and **D2 (DIN 1.2379)** for many applications. #### **3. Chemical Composition (Typical, Weight %)** | Element | Content (%) | Element | Content (%) | | :--- | :--- | :--- | :--- | | **Carbon (C)** | 0.90 | **Chromium (Cr)** | 7.80 | | **Molybdenum (Mo)** | 2.50 | **Vanadium (V)** | 0.50 | | **Manganese (Mn)** | 0.60 | **Silicon (Si)** | 0.30 | | **Sulfur (S)** | ≤ 0.010 | **Phosphorus (P)** | ≤ 0.020 | | **Iron (Fe)** | Balance | #### **4. Typical Heat Treatment** * **Annealing:** Heat to 850-880°C (1560-1615°F), slow cool (15°C/hr) to 600°C, then air cool. Resulting hardness: **~215 HB**. * **Stress Relieving:** 600-650°C (1110-1200°F) after rough machining. * **Preheating:** 650°C (1200°F) and 850°C (1560°F) - two-stage preheat is recommended. * **Austenitizing:** **970-1010°C (1780-1850°F)**. Soak thoroughly (30-45 min.). Higher temperatures increase wear resistance but reduce toughness. * **Quenching:** Cool in still **air** or **forced air** (2-3 bar). For complex shapes, quenching in **salt bath or oil** at 450-550°C followed by air cooling can minimize risk. * **Tempering:** **Immediate tempering** is critical. Typically double tempered at **180-250°C (355-480°F)** for cold work, or at **400-550°C (750-1020°F)** for applications requiring higher toughness. Hardness after tempering typically ranges from **58-62 HRC** for cold work applications. #### **5. Typical Physical & Mechanical Properties (Hardened & Tempered)** * **Density:** 7.73 g/cm³ (0.279 lb/in³) * **Modulus of Elasticity:** ~210 GPa (30.5 x 10⁶ psi) * **Thermal Expansion Coefficient:** 12.2 x 10⁻⁶/K (20-100°C) * **Thermal Conductivity:** ~25 W/m·K (at 20°C) * **Hardness (Tempered at 200°C):** **60-62 HRC** * **Compressive Strength:** **~2600 MPa** (at 60 HRC) – Very high. * **Toughness:** Good to very good for its wear resistance level. #### **6. Primary Applications** ASSAB 88 is exceptionally versatile and is used for demanding cold work applications where a balance of properties is essential: * **Precision Blanking and Fineblanking Dies** (a key application area). * **Progressive Dies and Lamination Dies** for electronics and motors. * **Forming, Bending, and Cold Extrusion Tools**. * **Shear Blades and Slitter Knives**. * **Thread Rolling Dies and Knurls**. * **High-Wear Plastic Molds and Die-Casting Dies (cores and inserts)** for abrasive materials. * **Master Hobs and Gear Cutting Tools**. * **Punches and Wear Parts** subject to high pressure. #### **7. Availability & Processing Notes** * **Forms Available:** Precision ground flat stock, forged blocks, bars, and pre-finished modules. * **Machining:** Machine in the soft-annealed condition. Use sharp tools with positive rakes. * **EDM (Electrical Discharge Machining):** Standard procedure. A low-temperature stress relief (e.g., 150-200°C) is recommended after roughing. * **Surface Treatment:** Excellent candidate for **PVD coatings (TiN, TiCN, CrN)** and nitriding to further enhance surface performance. * **Welding:** Possible for repair using proper techniques (preheat, matching electrodes, post-weld tempering), but not generally recommended for critical tool sections. --- **Disclaimer:** This information is for reference purposes. ASSAB 88 is a high-performance grade, and its properties are highly dependent on precise heat treatment. For critical tooling, always consult the latest official **Assab / Uddeholm technical data sheets** and consider their application engineering support for optimal results. -:- For detailed product information, please contact sales. -: Assab Steels ASSAB 88 Cold Work Steel Specification Dimensions Size： Diameter 20-1000 mm Length <6842 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: Assab Steels ASSAB 88 Cold Work Steel Properties -:- For detailed product information, please contact sales. -:

Applications of Assab Steel Sheet,Plates ASSAB 88 Cold Work Steel Sheet,Plate -:- For detailed product information, please contact sales. -: Chemical Identifiers Assab Steel Sheet,Plates ASSAB 88 Cold Work Steel Sheet,Plate -:- For detailed product information, please contact sales. -:

Packing of Assab Steel Sheet/Plates ASSAB 88 Cold Work Steel Sheet/Plate -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Sheet/Plate drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 3313 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition