Inconel 600 Alloy Powder,CAS RN: N/A
Product Code : ECr-A513-CU-CU
HANG JI specializes in producing high purity Inconel 600 Alloy Powder,CAS*: N/A with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N,6N5, and in some cases up to 99.99999% (7N),99.999999% (8N),HANG JI produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas .Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.Additional technical, research and safety (MSDS) information is available,
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
CAS #: N/A
Linear Formula: NiCrFe
MDL Number: N/A
EC No.: N/A
-:-
-:- ：--- For detailed product information, please contact sales.
-:-
Synonyms: :----------------
InCo 600, In600, Alloy 600, UNS N06600, ASTM B163, ASTM B166, ASTM B167, ASTM B168, ASTM B366, ASTM B516, ASTM B517, ASTM B564, ASTM B751, ASME SB-163, SB-166 - SB-168, SB-564, Boiler Code Sections I, III, VIII, IX, Nickel-Chromium Alloy, NACE MR-01-75; QQ-W-390; MIL-R-5031, MIL-T-23227, MIL-N-23228, MIL-N-23229; AFNOR NC 15 Fe, SAE AMS 5540, 5580, 5665, 5687, 7232; DIN 17742, 17750 - 17754; Werkstoff Nr. 2.4816; VdTUV 305
Compound Formula: Ni/Cr/Fe
Appearance: Gray powder
Melting Point: 1354-1413 °C
Boiling Point: N/A
Density: 8.47 g/cm3
Solubility in H2O: N/A
Tensile Strength: 520-830 MPa (annealed)
Thermal Conductivity: 14.9 W/m·°C
Electrical Resistivity: 1.03 µΩ·m
Specific Heat: 444 J/kg·°C
Health & Safety Information
Signal Word: Danger
Hazard Statements: H317-H351-H372
Hazard Codes: Xn
Precautionary Statements: P260-P261-P280-P363-P405-P501
Risk Codes: N/A
Safety Statements: N/A
Transport Information: NONH for all modes of transport
GHS Pictogram: Image,Image
Chemical Identifiers
Linear Formula: NiCrFe
Pubchem CID: N/A
MDL Number: N/A
EC No.: N/A
-:-
--- For detailed product information, please contact sales. ：
---
Packing of
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2427 gallon liquid totes Special package is available on request.
