ASTM A611 Steel Flange, grade E

1,We Manufacturing processes are primarily classified into four types: 1:Forging, 2:Casting, 3:Cutting, 4:Rolling. 2,We can manufacture in accordance with these standards. Standards: GB Series (Chinese Standards), JB Series (Machinery Standards), HG Series (Chemical Industry Standards), ASME B16.5 (American Standards), BS4504 (British Standards), DIN (German Standards), and JIS (Japanese Standards). Internationally, there are two primary systems of pipe flange standards: the European system, represented by the German DIN standards (including those of the former Soviet Union), and the American system, represented by the US ANSI pipe flange standards. Other common standards include: the Chinese Ministry of Machinery Industry standards (JB series), the Ministry of Chemical Industry standards (HG series), the Chinese National Standard *GB/T 9112–9124-2010 Steel Pipe Flanges*, as well as US standards (ASME B16.5), British standards (BS4504), German standards (DIN), Japanese standards (JIS), and marine standards (CBM), among others. The nominal pressure ratings for the PN series are designated by "PN" and comprise the following nine levels: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, and PN160. The nominal pressure ratings for the Class series are designated by "Class" and comprise the following six levels: Class150, Class300, Class600, Class900, Class1500, and Class2500. Flange Classification 1. **According to Chemical Industry Standards:** Flanges are classified as follows: Plate Flat Welding Flange (PL), Necked Flat Welding Flange (SO), Necked Butt Welding Flange (WN), Integral Flange (IF), Socket Welding Flange (SW), Threaded Flange (Th), Butt Welding Ring Loose Flange (PJ/SE), Blind Flange (BL), Flat Welding Ring Loose Flange (PJ/PJ), and Lined Blind Flange (BL(s)). 2. **According to Petrochemical (SH) Industry Standards:** Flanges are classified as follows: Threaded Flange (PL), Butt Welding Flange (WN), Flat Welding Flange (SO), Socket Welding Flange (SW), Loose Flange (LJ), and Blind Flange (no specific designation). 3. **According to Machinery (JB) Industry Standards:** Flanges are classified as follows: Integral Flange, Butt Welding Flange, Plate Flat Welding Flange, Butt Welding Ring Plate Loose Flange, Flat Welding Ring Plate Loose Flange, Lap Joint Ring Plate Loose Flange, and Blind Flange. 4. **According to Connection Method/Type:** Flanges are classified as follows: Plate Flat Welding Flange, Necked Flat Welding Flange, Necked Butt Welding Flange, Socket Welding Flange, Threaded Flange, Blind Flange, Necked Butt Welding Ring Loose Flange, Flat Welding Ring Loose Flange, Ring-Type Joint (RTJ) Flange and Blind Flange, Large-Diameter Plate Flange, Large-Diameter High-Neck Flange, Figure-8 Blind Plate, Butt Welding Ring Loose Flange, etc. 5. **According to the Component Being Connected:** Flanges can be classified into Vessel Flanges and Pipe Flanges. 6. **According to Structural Type:** Flanges include Integral Flanges, Threaded Flanges, Flat Welding Flanges, Butt Welding Flanges, Lap Joint (Loose/Swivel) Flanges, and Blind Flanges. A flange—also referred to as a flange plate or rim—is a component used to connect shafts to one another, or, more commonly, to join the ends of pipes. Flanges are also utilized at the inlet and outlet ports of equipment to facilitate connections between two devices—for instance, the flange on a speed reducer. A "flange connection" or "flanged joint" refers to a detachable joint assembly comprising three interconnected elements—a flange, a gasket, and bolts—that together form a sealed structural unit. In the context of piping systems, a "pipe flange" specifically denotes a flange used for plumbing within the installation; when applied to equipment, it refers to the inlet or outlet flange of that specific device. Flanges feature a series of holes through which bolts are inserted to securely fasten the two flanges together, while a gasket placed between the flanges ensures a leak-proof seal. Flanges are broadly categorized into three types: threaded (screw-in) flanges, welded flanges, and clamp-type flanges. Flanges are invariably used in pairs; threaded flanges are suitable for low-pressure piping applications, whereas welded flanges are required for systems operating at pressures exceeding 4 kilograms per square centimeter. A sealing gasket is inserted between the two flange plates, which are then firmly secured using bolts. The thickness of a flange—as well as the specifications of the bolts used to fasten it—vary depending on the specific pressure rating required for the application. When connecting equipment such as water pumps or valves to piping systems, the corresponding connection points on these devices are often manufactured in the shape of a matching flange; this method of attachment is also referred to as a "flange connection." Generally, any connecting component that utilizes bolts to join and seal the perimeters of two flat surfaces—such as the joints in ventilation ducts—is termed a "flange"; such components may collectively be classified as "flange-type parts." However, since such a connection often constitutes merely a *portion* of a larger device—for instance, the interface between a flange and a water pump—it would be inappropriate to classify the entire water pump itself as a "flange-type part." Conversely, smaller components—such as valves—that feature such flanged interfaces may indeed be appropriately categorized as "flange-type parts." -:- For detailed product information, please contact sales. -: ASTM A611 Steel Flange, grade E Product Information -:- For detailed product information, please contact sales. -: ASTM A611 Steel Flange, grade E Synonyms -:- For detailed product information, please contact sales. -:

ASTM A611 Steel, grade E Product Information -:- For detailed product information, please contact sales. -: ### **Product Introduction: ASTM A611 Grade E Steel** **ASTM A611 Grade E** is an ultra-high-strength cold-rolled carbon steel sheet representing the premium grade in the A611 specification series. This grade is specifically engineered for the most demanding structural applications where maximum strength and durability are required while maintaining essential formability characteristics. With a minimum yield strength of **45 ksi (310 MPa)**, Grade E provides exceptional mechanical properties, making it suitable for critical applications where structural performance is paramount. --- #### **1. International Standards & Grades** **Primary Standard:** **ASTM A611/A611M** - "Standard Specification for Structural Quality Cold-Rolled Carbon Steel Sheet" **Grade Classification:** - **Grade E** - Minimum yield strength 45 ksi (310 MPa) - Other grades in A611 series: A, B, C, D **International Equivalents:** - **EN 10130**: DC07 - **JIS G3141**: SPCEN - **GB/T 5213**: DC08 - **ISO 3574**: CR6 --- #### **2. Chemical Composition** The typical chemical composition requirements for ASTM A611 Grade E: | Element | Composition (Maximum %) | |---|---| | Carbon (C) | 0.22-0.28 | | Manganese (Mn) | 1.10-1.50 | | Phosphorus (P) | 0.03 | | Sulfur (S) | 0.030 | | Silicon (Si) | 0.25 | **Key Composition Features:** - **Premium Carbon Content**: Maximizes strength and hardness properties - **High Manganese Levels**: Provides exceptional hardenability and tensile strength - **Tight Sulfur Control**: Enhanced purity for improved ductility and formability - **Advanced Alloy Design**: Optimized for superior strength-to-weight ratio --- #### **3. Physical & Mechanical Properties** **Mechanical Properties:** | Property | Value | |---|---| | **Tensile Strength** | 500-600 MPa (73-87 ksi) | | **Yield Strength (min.)** | 310 MPa (45 ksi) | | **Elongation in 2" (min.)** | 16% | | **Hardness (HRB)** | 75-90 | **Physical Properties:** - **Density**: 7.85 g/cm³ (0.284 lb/in³) - **Modulus of Elasticity**: 200 GPa (29,000 ksi) - **Poisson's Ratio**: 0.29 - **Thermal Conductivity**: 48.5 W/m·K - **Coefficient of Thermal Expansion**: 12.0 × 10⁻⁶/°C - **Electrical Resistivity**: 0.22 μΩ·m --- #### **4. Product Applications** **Critical Automotive Components:** - Advanced safety cage structures - High-strength door beams - Reinforced pillar components - Crash management systems **Aerospace and Defense:** - Aircraft interior structures - Defense equipment components - Satellite support structures - Aviation ground support equipment **Premium Construction:** - High-rise building components - Seismic reinforcement elements - Critical structural supports - Advanced architectural systems **Heavy Industrial:** - Precision machinery frames - High-stress equipment components - Advanced conveyor systems - Industrial robot structures **Specialty Applications:** - Security system components - Ballistic protection elements - High-performance sporting equipment - Advanced transportation systems --- #### **5. Fabrication Characteristics** **Welding Performance:** - **Challenging Weldability**: Requires specialized procedures and expertise - **Mandatory Preheat**: Essential for all welding operations - **Recommended Processes**: GTAW, Laser welding, Electron beam welding - **Filler Metals**: High-strength specialty electrodes and wires **Forming Characteristics:** - **Limited Formability**: Restricted to simple bending operations - **Minimum Bend Radius**: 2.0t for 90° bends - **Advanced Springback Management**: Critical for dimensional accuracy - **Specialized Tooling**: Required for successful forming operations **Machining & Cutting:** - **Difficult Machinability**: Requires premium carbide tooling - **Precision Cutting**: Waterjet and laser cutting recommended - **Specialized Equipment**: High-tonnage capacity required - **Surface Integrity**: Maintains quality with proper techniques **Surface Treatment:** - **Advanced Preparation**: Essential for coating adhesion - **Specialized Plating**: Requires customized processes - **High-Performance Coatings**: Excellent substrate for premium finishes - **Quality Assurance**: Rigorous inspection for critical applications --- ### **Technical Summary** ASTM A611 Grade E represents the ultimate in cold-rolled structural steel technology, offering unmatched mechanical properties within the A611 specification framework. The sophisticated chemical composition, featuring precisely controlled high carbon and manganese levels, delivers exceptional strength characteristics while maintaining the essential formability required for manufacturing advanced components. This premium grade is specifically designed for the most demanding applications where failure is not an option. Its exceptional strength-to-weight ratio makes it invaluable in weight-critical designs across aerospace, automotive safety, and advanced industrial sectors. While requiring state-of-the-art fabrication techniques and rigorous quality control, Grade E delivers unparalleled performance in mission-critical applications. The material's consistent ultra-high strength properties, combined with its reliable performance under extreme conditions, establish it as the material of choice for engineers designing next-generation structural components. Grade E provides a cost-effective alternative to exotic alloys while delivering premium performance characteristics that meet the most stringent requirements in advanced manufacturing and engineering applications. -:- For detailed product information, please contact sales. -: ASTM A611 Steel, grade E Specification Dimensions Size： Diameter 20-1000 mm Length <4305 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: ASTM A611 Steel, grade E Properties -:- For detailed product information, please contact sales. -:

Applications of ASTM A611 Steel Flange, grade E -:- For detailed product information, please contact sales. -: Chemical Identifiers ASTM A611 Steel Flange, grade E -:- For detailed product information, please contact sales. -:

Packing of ASTM A611 Steel Flange, grade E -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Flange drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 776 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition