ASTM A225 Low Alloy Steel Flange, Grade B

1,We Manufacturing processes are primarily classified into four types: 1:Forging, 2:Casting, 3:Cutting, 4:Rolling. 2,We can manufacture in accordance with these standards. Standards: GB Series (Chinese Standards), JB Series (Machinery Standards), HG Series (Chemical Industry Standards), ASME B16.5 (American Standards), BS4504 (British Standards), DIN (German Standards), and JIS (Japanese Standards). Internationally, there are two primary systems of pipe flange standards: the European system, represented by the German DIN standards (including those of the former Soviet Union), and the American system, represented by the US ANSI pipe flange standards. Other common standards include: the Chinese Ministry of Machinery Industry standards (JB series), the Ministry of Chemical Industry standards (HG series), the Chinese National Standard *GB/T 9112–9124-2010 Steel Pipe Flanges*, as well as US standards (ASME B16.5), British standards (BS4504), German standards (DIN), Japanese standards (JIS), and marine standards (CBM), among others. The nominal pressure ratings for the PN series are designated by "PN" and comprise the following nine levels: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, and PN160. The nominal pressure ratings for the Class series are designated by "Class" and comprise the following six levels: Class150, Class300, Class600, Class900, Class1500, and Class2500. Flange Classification 1. **According to Chemical Industry Standards:** Flanges are classified as follows: Plate Flat Welding Flange (PL), Necked Flat Welding Flange (SO), Necked Butt Welding Flange (WN), Integral Flange (IF), Socket Welding Flange (SW), Threaded Flange (Th), Butt Welding Ring Loose Flange (PJ/SE), Blind Flange (BL), Flat Welding Ring Loose Flange (PJ/PJ), and Lined Blind Flange (BL(s)). 2. **According to Petrochemical (SH) Industry Standards:** Flanges are classified as follows: Threaded Flange (PL), Butt Welding Flange (WN), Flat Welding Flange (SO), Socket Welding Flange (SW), Loose Flange (LJ), and Blind Flange (no specific designation). 3. **According to Machinery (JB) Industry Standards:** Flanges are classified as follows: Integral Flange, Butt Welding Flange, Plate Flat Welding Flange, Butt Welding Ring Plate Loose Flange, Flat Welding Ring Plate Loose Flange, Lap Joint Ring Plate Loose Flange, and Blind Flange. 4. **According to Connection Method/Type:** Flanges are classified as follows: Plate Flat Welding Flange, Necked Flat Welding Flange, Necked Butt Welding Flange, Socket Welding Flange, Threaded Flange, Blind Flange, Necked Butt Welding Ring Loose Flange, Flat Welding Ring Loose Flange, Ring-Type Joint (RTJ) Flange and Blind Flange, Large-Diameter Plate Flange, Large-Diameter High-Neck Flange, Figure-8 Blind Plate, Butt Welding Ring Loose Flange, etc. 5. **According to the Component Being Connected:** Flanges can be classified into Vessel Flanges and Pipe Flanges. 6. **According to Structural Type:** Flanges include Integral Flanges, Threaded Flanges, Flat Welding Flanges, Butt Welding Flanges, Lap Joint (Loose/Swivel) Flanges, and Blind Flanges. A flange—also referred to as a flange plate or rim—is a component used to connect shafts to one another, or, more commonly, to join the ends of pipes. Flanges are also utilized at the inlet and outlet ports of equipment to facilitate connections between two devices—for instance, the flange on a speed reducer. A "flange connection" or "flanged joint" refers to a detachable joint assembly comprising three interconnected elements—a flange, a gasket, and bolts—that together form a sealed structural unit. In the context of piping systems, a "pipe flange" specifically denotes a flange used for plumbing within the installation; when applied to equipment, it refers to the inlet or outlet flange of that specific device. Flanges feature a series of holes through which bolts are inserted to securely fasten the two flanges together, while a gasket placed between the flanges ensures a leak-proof seal. Flanges are broadly categorized into three types: threaded (screw-in) flanges, welded flanges, and clamp-type flanges. Flanges are invariably used in pairs; threaded flanges are suitable for low-pressure piping applications, whereas welded flanges are required for systems operating at pressures exceeding 4 kilograms per square centimeter. A sealing gasket is inserted between the two flange plates, which are then firmly secured using bolts. The thickness of a flange—as well as the specifications of the bolts used to fasten it—vary depending on the specific pressure rating required for the application. When connecting equipment such as water pumps or valves to piping systems, the corresponding connection points on these devices are often manufactured in the shape of a matching flange; this method of attachment is also referred to as a "flange connection." Generally, any connecting component that utilizes bolts to join and seal the perimeters of two flat surfaces—such as the joints in ventilation ducts—is termed a "flange"; such components may collectively be classified as "flange-type parts." However, since such a connection often constitutes merely a *portion* of a larger device—for instance, the interface between a flange and a water pump—it would be inappropriate to classify the entire water pump itself as a "flange-type part." Conversely, smaller components—such as valves—that feature such flanged interfaces may indeed be appropriately categorized as "flange-type parts." -:- For detailed product information, please contact sales. -: ASTM A225 Low Alloy Steel Flange, Grade B Product Information -:- For detailed product information, please contact sales. -: ASTM A225 Low Alloy Steel Flange, Grade B Synonyms -:- For detailed product information, please contact sales. -:

ASTM A225 Low Alloy Steel, Grade B Product Information -:- For detailed product information, please contact sales. -: ### **Product Introduction: ASTM A225 Grade B Steel** **ASTM A225 Grade B** is a manganese-vanadium-nickel alloy steel plate designed as an alternative chemistry variant within the A225 specification. This grade maintains similar mechanical properties to Grade A while offering different chemical composition options, providing manufacturers with flexibility in material selection for fusion welded pressure vessels and structural applications. --- #### **1. International Standards & Grades** **Primary Standard:** **ASTM A225/A225M** - "Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel" **Grade Classification:** - **Grade B** - Alternative chemistry manganese-vanadium-nickel alloy steel - **Grade A** - Standard chemistry variant - **Grade C** - Enhanced properties variant **International Equivalents:** - **EN 10028-3**: 15MnNi6-3 - **JIS G3119**: SPV 410 - **GB/T 713**: 15MnNi - **ISO 9328-3**: 15MnNi6-3 --- #### **2. Chemical Composition** The chemical composition requirements for ASTM A225 Grade B: | Element | Composition (Maximum %) | |---|---| | Carbon (C) | 0.22 | | Manganese (Mn) | 1.15-1.60 | | Phosphorus (P) | 0.035 | | Sulfur (S) | 0.040 | | Silicon (Si) | 0.30 | | Vanadium (V) | 0.10-0.20 | | Nickel (Ni) | 0.40-0.70 | **Key Composition Features:** - **Alternative Chemistry**: Different balance from Grade A while maintaining properties - **Manganese-Vanadium System**: Primary strengthening mechanism - **Nickel Enhancement**: Maintains toughness and ductility - **Vanadium Control**: Provides consistent precipitation strengthening --- #### **3. Physical & Mechanical Properties** **Mechanical Properties (for thicknesses ≤ 50 mm):** | Property | Value | |---|---| | **Tensile Strength** | 550-690 MPa (80-100 ksi) | | **Yield Strength (min.)** | 345 MPa (50 ksi) | | **Elongation in 2" (min.)** | 18% | | **Elongation in 8" (min.)** | 20% | **Impact Toughness Properties:** - **Charpy V-Notch Test Temperature**: -20°F (-29°C) - **Minimum Impact Energy**: 20 ft-lbf (27 J) - **Consistent Toughness**: Maintains reliable fracture resistance **Physical Properties:** - **Density**: 7.86 g/cm³ (0.284 lb/in³) - **Modulus of Elasticity**: 200 GPa (29,000 ksi) - **Thermal Conductivity**: 48.3 W/m·K - **Coefficient of Thermal Expansion**: 11.8 × 10⁻⁶/°C - **Specific Heat Capacity**: 473 J/kg·K --- #### **4. Product Applications** **Pressure Vessel Construction:** - Fusion welded pressure vessels - Boiler components - High-pressure containers - Process industry vessels **Structural Engineering:** - Heavy structural frameworks - Support structures - Industrial building components - Bridge components **Energy and Power:** - Power plant structural members - Energy storage system components - Turbine support structures - Heat exchanger frameworks **Industrial Machinery:** - Heavy equipment frames - Machinery base plates - Industrial platform structures - Material handling equipment --- #### **5. Fabrication Characteristics** **Welding Performance:** - **Excellent Weldability**: Designed for fusion welding applications - **Preheat Requirements**: 150-250°F (65-120°C) based on thickness - **Post-Weld Heat Treatment**: Stress relieving at 1100-1200°F (595-650°C) - **Recommended Processes**: SMAW, GMAW, FCAW, SAW - **Filler Metals**: E8018-C3, ER80S-G or equivalent **Forming & Machining:** - **Good Formability**: Suitable for structural forming operations - **Machinability**: Fair (approximately 55% of B1112 steel) - **Cutting Methods**: Plasma, laser, and waterjet cutting - **Bend Characteristics**: Good performance in formed components **Heat Treatment:** - Typically supplied in normalized condition - Normalizing temperature: 1600-1700°F (870-925°C) - Optional tempering available - Consistent response to thermal processing **Quality Assurance:** - **Impact Testing Required**: Charpy V-Notch at specified temperature - **Chemical Certification**: Full heat analysis provided - **Mechanical Testing**: Comprehensive property verification - **Quality Standards**: Meets pressure vessel quality requirements --- ### **Technical Summary** ASTM A225 Grade B provides an alternative chemistry option within the manganese-vanadium-nickel alloy steel series, offering manufacturers flexibility while maintaining the same high performance standards as Grade A. With a minimum yield strength of 50 ksi (345 MPa) and excellent impact properties at -20°F (-29°C), this grade delivers reliable performance for demanding applications. The alternative chemical composition allows for manufacturing flexibility while ensuring consistent mechanical properties and performance characteristics. This makes Grade B particularly valuable for situations where specific chemical requirements or manufacturing processes favor this chemistry variant. Like Grade A, Grade B is specifically engineered for fusion welded applications, exhibiting excellent weldability characteristics that make it suitable for complex pressure vessel fabrication and critical structural components. The material's balanced properties ensure reliable performance in welded constructions while maintaining the required strength and toughness. ASTM A225 Grade B has proven its reliability in various industrial applications, particularly in pressure vessel construction and heavy structural frameworks where the combination of high strength, good toughness, and excellent weldability are essential. Its performance equivalence to Grade A, combined with the flexibility of alternative chemistry, makes it a valuable option for engineers and fabricators in selecting the most appropriate material for specific project requirements. -:- For detailed product information, please contact sales. -: ASTM A225 Low Alloy Steel, Grade B Specification Dimensions Size： Diameter 20-1000 mm Length <4340 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: ASTM A225 Low Alloy Steel, Grade B Properties -:- For detailed product information, please contact sales. -:

Applications of ASTM A225 Low Alloy Steel Flange, Grade B -:- For detailed product information, please contact sales. -: Chemical Identifiers ASTM A225 Low Alloy Steel Flange, Grade B -:- For detailed product information, please contact sales. -:

Packing of ASTM A225 Low Alloy Steel Flange, Grade B -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Flange drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 811 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition