Nickel Molybdenum Alloy,CAS RN: N/A
Product Code : EMo-A420-CU-CU
HANG JI specializes in producing high purity Nickel Molybdenum Alloy,CAS*: N/A with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N,6N5, and in some cases up to 99.99999% (7N),99.999999% (8N),HANG JI produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas .Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.Additional technical, research and safety (MSDS) information is available,
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
CAS #: N/A
Linear Formula: Ni-Mo
MDL Number: N/A
EC No.: N/A
-:-
-:- ：--- For detailed product information, please contact sales.
-:-
Synonyms: :----------------
MoNi, molybdenum nickel superalloy, Ni84Mo16, Ni50Mo50, UNS N10629, Nimofer 6928, NiMo28, CAS 12033-21-5, CAS 12384-29-1, Actimet 8040P, Nickel (skeletal), molybdenum promoted (1 wt%)
Compound Formula: NiMo
Appearance: Gray metallic solid in various forms such as sheets and plates, discs, foils, rods, tubes, ingots, sputtering target, and powder
Melting Point: 1560 °C
Boiling Point: N/A
Density: 9.2 g/cm3
Solubility in H2O: N/A
Monoisotopic Mass: 155.841 g/mol
Poisson's Ratio: 0.31
Young's Modulus: 220 GPa
Tensile Strength: 860 MPa (Ultimate)
Thermal Conductivity: 11.1W/m·K (20 °C)
Thermal Expansion: 10.0 µm/m·K
Electrical Resistivity: 137 µΩ·cm
Specific Heat: 377-390 J/kg·K (20 °C)
Health & Safety Information
Signal Word: Danger
Hazard Statements: H317-H351-H372
Hazard Codes: T, Xi, Xn
Precautionary Statements: P260-P261-P280-P363-P405-P501
Risk Codes: R40-R43-R48/23
Safety Statements: N/A
Transport Information: NONH for all modes of transport
GHS Pictogram: Image,Image
Chemical Identifiers
Linear Formula: Ni-Mo
Pubchem CID: 13066885
MDL Number: N/A
EC No.: N/A
IUPAC Name: molybdenum; nickel
SMILES: [Ni].[Mo]
InchI Identifier: InChI=1S/Mo.Ni
InchI Key: DDTIGTPWGISMKL-UHFFFAOYSA-N
-:-
--- For detailed product information, please contact sales. ：
---
Packing of
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 10673 gallon liquid totes Special package is available on request.
