Platinum Powder,CAS RN: 7440-06-4
Product Code : EPt-A176-CU-CU
HANG JI specializes in producing high purity Platinum Powder,CAS*: 7440-06-4 with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N,6N5, and in some cases up to 99.99999% (7N),99.999999% (8N),HANG JI produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas .Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.Additional technical, research and safety (MSDS) information is available,
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
CAS #: 7440-06-4
Linear Formula: Pt
MDL Number: MFCD00011179
EC No.: 231-116-1
-:-
-:- ：--- For detailed product information, please contact sales.
-:-
Synonyms: :----------------
Platinum particles, Platinum microparticles, Platinum micropowder, Platinum micro powder, Platinum micron powder, Platinum submicron powder, Platinum sub-micron powder,
Molecular Weight: 195.08
Appearance: Gray Powder
Melting Point: 1772 °C
Boiling Point: 3827 °C
Density: 21.45 g/cm3
Solubility in H2O: N/A
Poisson's Ratio: 0.38
Young's Modulus: 168 GPa
Vickers Hardness: 549 MPa
Tensile Strength: N/A
Thermal Conductivity: 0.716 W/cm/K @ 298.2 K
Thermal Expansion: (25 °C) 8.8 µm·m-1·K-1
Electrical Resistivity: 10.6 microhm-cm @ 20 °C
Electronegativity: 2.2 Paulings
Specific Heat: 0.0317 Cal/g/K @ 25 °C
Heat of Fusion: 4.70 Cal/gm mole
Heat of Vaporization: 122 K-Cal/gm atom at 3827 °C
Health & Safety Information
Signal Word: Danger
Hazard Statements: H228
Hazard Codes: N/A
Precautionary Statements: P210-P240-P241-P280-P370 + P378
Flash Point: Not applicable
Risk Codes: 11
Safety Statements: 7/9-16-33
RTECS Number: TP2160000
Transport Information: UN 3089 4.1 / PGII
WGK Germany: nwg
GHS Pictogram: Image
Chemical Identifiers
Linear Formula: Pt
Pubchem CID: 23939
MDL Number: MFCD00011179
EC No.: 231-116-1
Beilstein/Reaxys No.: N/A
SMILES: [Pt]
InchI Identifier: InChI=1S/Pt
InchI Key: BASFCYQUMIYNBI-UHFFFAOYSA-N
-:-
--- For detailed product information, please contact sales. ：
---
Packing of
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 14483 gallon liquid totes Special package is available on request.
