ASTM A514 Steel Wire, grade B

ASTM A514 Steel Wire, grade B, plate thickness ≤ 19 mm Product Information -:- For detailed product information, please contact sales. -: ASTM A514 Steel Wire, grade B, plate thickness ≤ 19 mm Synonyms -:- For detailed product information, please contact sales. -:

ASTM A514 Steel, grade B, plate thickness ≤ 19 mm Product Information -:- For detailed product information, please contact sales. -: ### **Technical Data Sheet: ASTM A514 Steel, Grade B (Plate Thickness ≤ 19 mm)** --- #### **1. Product Overview** ASTM A514 Grade B is a **high-strength quenched and tempered alloy steel plate** offering enhanced mechanical properties for the most demanding structural applications. With plate thickness limited to 19 mm (0.75 inches) or less for Grade B, this premium material provides exceptional strength-to-weight ratio, superior toughness, and reliable performance in severe service conditions. It is specifically engineered for applications where maximum structural efficiency and weight reduction are critical requirements. --- #### **2. International Standards & Equivalents** | Standard Organization | Designation | |-----------------------|-------------| | **ASTM International** | **A514 Grade B (t ≤ 19 mm)** | | **UNS Number** | **K11576** | | **ISO International Standard** | **ISO 4950** | | **European Norm (EN)** | **EN 10025-6 S690Q** | | **Japanese (JIS)** | **SHY685** | | **Chinese GB** | **GB/T 16270 Q690** | --- #### **3. Chemical Composition (Weight %)** | Element | Composition (%) | |---------|-----------------| | **Carbon (C)** | 0.12 - 0.21 | | **Manganese (Mn)** | 0.70 - 1.00 | | **Phosphorus (P)** | 0.035 max | | **Sulfur (S)** | 0.035 max | | **Silicon (Si)** | 0.40 - 0.80 | | **Nickel (Ni)** | 0.25 - 0.50 | | **Chromium (Cr)** | 0.40 - 0.65 | | **Molybdenum (Mo)** | 0.15 - 0.25 | | **Vanadium (V)** | 0.03 - 0.08 | | **Boron (B)** | 0.001 - 0.005 | | **Copper (Cu)** | 0.15 - 0.50 | | **Iron (Fe)** | Balance | **Key Composition Features:** - **Optimized Alloy System**: Balanced chemistry for maximum hardenability - **Lower Carbon Range**: Improved weldability compared to some high-strength grades - **Boron Treatment**: Critical for achieving high strength through thickness - **Reduced Nickel**: Cost-effective while maintaining performance --- #### **4. Mechanical Properties (Thickness ≤ 19 mm)** **Tensile Properties:** - **Tensile Strength**: 760 - 895 MPa (110 - 130 ksi) - **Yield Strength**: 690 MPa (100 ksi) min - **Elongation in 50 mm (2 in)**: 18% min - **Reduction of Area**: 40% min **Impact Properties:** - **Charpy V-Notch Impact**: 54 J (40 ft-lb) min at -18°C (0°F) - **Fracture Toughness**: Superior crack resistance - **Through-Thickness Properties**: Excellent Z-direction performance **Hardness Properties:** - **Brinell Hardness**: 235 - 293 HB - **Typical Hardness**: 265 HB --- #### **5. Physical Properties** | Property | Value | |----------|-------| | **Density** | 7.85 g/cm³ (0.284 lb/in³) | | **Modulus of Elasticity** | 200 GPa (29,000 ksi) | | **Shear Modulus** | 77 GPa (11,200 ksi) | | **Poisson's Ratio** | 0.29 | | **Thermal Conductivity** | 43.0 W/m·K at 20°C | | **Coefficient of Thermal Expansion** | 11.4 × 10⁻⁶ /K (20-100°C) | | **Specific Heat Capacity** | 465 J/kg·K | --- #### **6. Product Applications** **Heavy Construction and Mining:** - **Crane Boom Sections**: Critical tension and compression members - **Mining Truck Frames**: High-stress structural components - **Excavator Components**: Boom arms, stick sections, and attachment points - **Drilling Equipment**: Structural members in oil and gas drilling rigs **Transportation and Infrastructure:** - **Bridge Gusset Plates**: Critical connection elements in truss bridges - **Military Bridge Components**: Rapid deployment bridge systems - **Heavy Haul Truck Frames**: Off-highway vehicle chassis components - **Railway Components**: High-stress bogie frames and structural elements **Specialized Industrial Applications:** - **Pressure Vessel Components**: High-pressure applications - **Industrial Machinery**: High-stress machine frames and components - **Material Handling Systems**: Heavy-duty conveyor support structures - **Energy Sector Equipment**: Wind turbine components and support structures --- #### **7. Manufacturing & Fabrication** **Heat Treatment Process:** - **Austenitizing**: 870-925°C (1600-1700°F) - **Quenching**: Accelerated cooling for martensitic transformation - **Tempering**: 540-665°C (1000-1230°F) for optimal properties - **Final Microstructure**: Fine tempered martensite **Welding Procedures:** - **Pre-heat Requirement**: 150-200°C (300-400°F) minimum - **Interpass Control**: Maximum 230°C (450°F) - **Post-Weld Heat Treatment**: Often required at 595-665°C (1100-1230°F) - **Filler Metal Selection**: AWS E11018-M or equivalent high-strength electrodes - **Welding Processes**: SMAW, GMAW, FCAW with strict procedure control **Fabrication Considerations:** - **Thermal Cutting**: Oxy-fuel and plasma cutting require proper techniques - **Cold Forming**: Limited forming capability due to high strength - **Machining**: Requires carbide tooling and proper cutting parameters - **Stress Relief**: Recommended after severe forming operations --- #### **8. Quality Assurance & Testing** **Comprehensive Testing Protocol:** - Full chemical analysis for each heat - Multiple tension tests from different locations - Charpy V-notch impact tests at specified temperatures - Hardness surveys across plate surfaces - Ultrasonic examination for internal quality **Advanced Quality Requirements:** - Through-thickness tensile testing (when specified) - Fracture toughness testing for critical applications - Hydrogen content verification for welding applications - Microstructural examination and grain size determination --- #### **9. Corrosion Performance** - **Atmospheric Corrosion**: Similar to other low-alloy high-strength steels - **Protection Systems**: Requires high-performance coating systems - **Surface Preparation**: Critical for coating adhesion and performance - **Corrosion Fatigue**: Good resistance with proper design and protection --- #### **10. Available Product Forms** **Plate Specifications:** - **Thickness Range**: Up to 19 mm (0.75 inches) for Grade B - **Width Range**: Up to 3800 mm (150 inches) - **Length Range**: Up to 18000 mm (710 inches) - **Surface Conditions**: Mill finish, blast cleaned, or pre-primed --- #### **11. Technical Specifications** **Dimensional Tolerances:** - **Thickness Tolerance**: ±0.25 mm to ±0.7 mm - **Width Tolerance**: +20 mm, -0 mm - **Length Tolerance**: +40 mm, -0 mm - **Flatness**: 12 mm/m maximum **Special Design Properties:** - **Fatigue Strength**: Excellent for dynamic loading applications - **Fracture Toughness**: Superior crack initiation and propagation resistance - **Weld Joint Efficiency**: High with proper procedure qualification - **Weight Savings**: Significant compared to conventional structural steels --- **Technical Notes:** - Grade B provides minimum 690 MPa yield strength with enhanced toughness - Optimal for weight-critical structures and high-stress applications - Requires certified welding procedures and qualified personnel - Suitable for seismic and dynamic loading conditions - Must comply with AWS D1.1 and other relevant structural codes - Professional engineering analysis required for all applications *This information is for reference purposes. For complete technical specifications and design requirements, consult the latest ASTM A514 standard, applicable structural design codes, and AWS welding specifications. All applications require professional engineering design and certification.* -:- For detailed product information, please contact sales. -: ASTM A514 Steel, grade B, plate thickness ≤ 19 mm Specification Dimensions Size： Diameter 20-1000 mm Length <4265 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: ASTM A514 Steel, grade B, plate thickness ≤ 19 mm Properties -:- For detailed product information, please contact sales. -:

Applications of ASTM A514 Steel Wire, grade B, plate thickness ≤ 19 mm -:- For detailed product information, please contact sales. -: Chemical Identifiers ASTM A514 Steel Wire, grade B, plate thickness ≤ 19 mm -:- For detailed product information, please contact sales. -:

Packing of ASTM A514 Steel Wire, grade B, plate thickness ≤ 19 mm -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Wire drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 736 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition