Cast Stainless Steel Flange CF8M, UNS J92900

1,We Manufacturing processes are primarily classified into four types: 1:Forging, 2:Casting, 3:Cutting, 4:Rolling. 2,We can manufacture in accordance with these standards. Standards: GB Series (Chinese Standards), JB Series (Machinery Standards), HG Series (Chemical Industry Standards), ASME B16.5 (American Standards), BS4504 (British Standards), DIN (German Standards), and JIS (Japanese Standards). Internationally, there are two primary systems of pipe flange standards: the European system, represented by the German DIN standards (including those of the former Soviet Union), and the American system, represented by the US ANSI pipe flange standards. Other common standards include: the Chinese Ministry of Machinery Industry standards (JB series), the Ministry of Chemical Industry standards (HG series), the Chinese National Standard *GB/T 9112–9124-2010 Steel Pipe Flanges*, as well as US standards (ASME B16.5), British standards (BS4504), German standards (DIN), Japanese standards (JIS), and marine standards (CBM), among others. The nominal pressure ratings for the PN series are designated by "PN" and comprise the following nine levels: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, and PN160. The nominal pressure ratings for the Class series are designated by "Class" and comprise the following six levels: Class150, Class300, Class600, Class900, Class1500, and Class2500. Flange Classification 1. **According to Chemical Industry Standards:** Flanges are classified as follows: Plate Flat Welding Flange (PL), Necked Flat Welding Flange (SO), Necked Butt Welding Flange (WN), Integral Flange (IF), Socket Welding Flange (SW), Threaded Flange (Th), Butt Welding Ring Loose Flange (PJ/SE), Blind Flange (BL), Flat Welding Ring Loose Flange (PJ/PJ), and Lined Blind Flange (BL(s)). 2. **According to Petrochemical (SH) Industry Standards:** Flanges are classified as follows: Threaded Flange (PL), Butt Welding Flange (WN), Flat Welding Flange (SO), Socket Welding Flange (SW), Loose Flange (LJ), and Blind Flange (no specific designation). 3. **According to Machinery (JB) Industry Standards:** Flanges are classified as follows: Integral Flange, Butt Welding Flange, Plate Flat Welding Flange, Butt Welding Ring Plate Loose Flange, Flat Welding Ring Plate Loose Flange, Lap Joint Ring Plate Loose Flange, and Blind Flange. 4. **According to Connection Method/Type:** Flanges are classified as follows: Plate Flat Welding Flange, Necked Flat Welding Flange, Necked Butt Welding Flange, Socket Welding Flange, Threaded Flange, Blind Flange, Necked Butt Welding Ring Loose Flange, Flat Welding Ring Loose Flange, Ring-Type Joint (RTJ) Flange and Blind Flange, Large-Diameter Plate Flange, Large-Diameter High-Neck Flange, Figure-8 Blind Plate, Butt Welding Ring Loose Flange, etc. 5. **According to the Component Being Connected:** Flanges can be classified into Vessel Flanges and Pipe Flanges. 6. **According to Structural Type:** Flanges include Integral Flanges, Threaded Flanges, Flat Welding Flanges, Butt Welding Flanges, Lap Joint (Loose/Swivel) Flanges, and Blind Flanges. A flange—also referred to as a flange plate or rim—is a component used to connect shafts to one another, or, more commonly, to join the ends of pipes. Flanges are also utilized at the inlet and outlet ports of equipment to facilitate connections between two devices—for instance, the flange on a speed reducer. A "flange connection" or "flanged joint" refers to a detachable joint assembly comprising three interconnected elements—a flange, a gasket, and bolts—that together form a sealed structural unit. In the context of piping systems, a "pipe flange" specifically denotes a flange used for plumbing within the installation; when applied to equipment, it refers to the inlet or outlet flange of that specific device. Flanges feature a series of holes through which bolts are inserted to securely fasten the two flanges together, while a gasket placed between the flanges ensures a leak-proof seal. Flanges are broadly categorized into three types: threaded (screw-in) flanges, welded flanges, and clamp-type flanges. Flanges are invariably used in pairs; threaded flanges are suitable for low-pressure piping applications, whereas welded flanges are required for systems operating at pressures exceeding 4 kilograms per square centimeter. A sealing gasket is inserted between the two flange plates, which are then firmly secured using bolts. The thickness of a flange—as well as the specifications of the bolts used to fasten it—vary depending on the specific pressure rating required for the application. When connecting equipment such as water pumps or valves to piping systems, the corresponding connection points on these devices are often manufactured in the shape of a matching flange; this method of attachment is also referred to as a "flange connection." Generally, any connecting component that utilizes bolts to join and seal the perimeters of two flat surfaces—such as the joints in ventilation ducts—is termed a "flange"; such components may collectively be classified as "flange-type parts." However, since such a connection often constitutes merely a *portion* of a larger device—for instance, the interface between a flange and a water pump—it would be inappropriate to classify the entire water pump itself as a "flange-type part." Conversely, smaller components—such as valves—that feature such flanged interfaces may indeed be appropriately categorized as "flange-type parts." -:- For detailed product information, please contact sales. -: Cast Stainless Steel Flange CF8M, UNS J92900 Product Information -:- For detailed product information, please contact sales. -: Cast Stainless Steel Flange CF8M, UNS J92900 Synonyms -:- For detailed product information, please contact sales. -:

Cast Stainless Steel CF8M, UNS J92900 Product Information -:- For detailed product information, please contact sales. -: ### **Technical Datasheet: Cast Stainless Steel CF8M (UNS J92900)** #### **1. Product Overview** Cast Stainless Steel CF8M (UNS J92900) is an austenitic stainless steel casting alloy that serves as the cast equivalent of wrought 316 stainless steel. This chromium-nickel-molybdenum alloy offers superior corrosion resistance compared to standard CF8 alloy, particularly in chloride-containing environments. The molybdenum addition (2.0-3.0%) significantly enhances pitting and crevice corrosion resistance, making it an ideal choice for a wide range of corrosive applications across various industries. **Key Advantages:** - **Enhanced Corrosion Resistance:** Superior performance in chloride-containing environments - **Excellent Pitting Resistance:** Molybdenum addition provides exceptional pitting corrosion resistance - **Good Mechanical Properties:** Balanced combination of strength, ductility, and toughness - **Versatile Application Range:** Suitable for various corrosive media and temperatures - **Excellent Fabricability:** Good casting, welding, and machining characteristics --- #### **2. International Standard** This product conforms to the following international standards: - **UNS J92900:** Unified Numbering System designation - **ASTM A743/A743M:** Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel - **ASTM A351/A351M:** Standard for Castings, Austenitic, for Pressure-Containing Parts - **ASME SA351:** ASME Boiler and Pressure Vessel Code equivalent - **ISO 11972:** Corrosion-resistant cast steels for general applications --- #### **3. Chemical Composition (Heat Analysis, %)** The chemical composition is precisely controlled according to UNS J92900 requirements. | Element | Composition (%) | |---------|-----------------| | Carbon (C) | 0.08 max | | Manganese (Mn) | 1.50 max | | Silicon (Si) | 1.50 max | | Phosphorus (P), max | 0.04 | | Sulfur (S), max | 0.04 | | Chromium (Cr) | 18.0-21.0 | | Nickel (Ni) | 9.0-12.0 | | Molybdenum (Mo) | 2.0-3.0 | | Iron (Fe) | Balance | *Note: The molybdenum content is critical for enhanced pitting and crevice corrosion resistance in chloride environments.* --- #### **4. Mechanical Properties** Mechanical properties meet international standards for UNS J92900. **Minimum Required Values (Solution Annealed Condition):** - **Tensile Strength:** 485 MPa (70 ksi) min - **Yield Strength (0.2% Offset):** 205 MPa (30 ksi) min - **Elongation in 2" (50 mm):** 30.0% min - **Reduction of Area:** 40.0% min **Typical Achievable Properties:** - **Tensile Strength:** 515-620 MPa (75-90 ksi) - **Yield Strength:** 240-310 MPa (35-45 ksi) - **Elongation:** 35-50% - **Hardness:** 150-180 HBW - **Impact Strength:** Excellent at cryogenic temperatures --- #### **5. Physical Properties (Typical Values)** - **Density:** 7.98 g/cm³ (0.288 lb/in³) - **Modulus of Elasticity:** 193 GPa (28,000 ksi) - **Poisson's Ratio:** 0.28 - **Thermal Conductivity:** 16.3 W/m·K (at 100°C) - **Specific Heat Capacity:** 500 J/kg·K (at 0-100°C) - **Coefficient of Thermal Expansion:** 16.0 × 10⁻⁶/°C (20-100°C) - **Electrical Resistivity:** 0.74 μΩ·m - **Magnetic Permeability:** Essentially non-magnetic --- #### **6. Heat Treatment** **Solution Annealing Treatment:** - **Temperature Range:** 1040-1150°C (1900-2100°F) - **Soak Time:** 1 hour per inch of thickness, minimum 1 hour - **Cooling Method:** Rapid water quench or rapid air cool - **Objective:** To achieve homogeneous austenitic structure **Critical Processing Parameters:** - Rapid cooling through 425-815°C (800-1500°F) range is essential - Prevents chromium carbide precipitation at grain boundaries - Ensures optimal corrosion resistance --- #### **7. Corrosion Resistance** UNS J92900 offers enhanced corrosion resistance characteristics: - **Pitting Corrosion:** Excellent resistance due to molybdenum content (PREN ~24-26) - **Crevice Corrosion:** Superior performance in stagnant conditions - **General Corrosion:** Excellent resistance to a wide range of corrosive media - **Intergranular Corrosion:** Good resistance when properly heat treated - **Chloride Environments:** Enhanced resistance to chloride-induced corrosion - **Acid Resistance:** Good performance in various acid environments --- #### **8. Product Applications** UNS J92900 cast stainless steel is widely used in various industries: **Chemical Processing Industry:** - Reactors and pressure vessels - Heat exchangers and condensers - Process piping systems and valves **Marine and Offshore Applications:** - Seawater handling systems - Pump components and valve bodies - Marine hardware and fittings **Food and Pharmaceutical Industry:** - Processing equipment - Storage and mixing vessels - Sanitary processing systems **Oil and Gas Industry:** - Process equipment components - Valve bodies and fittings - Pipeline accessories --- #### **9. Fabrication & Welding Characteristics** **Casting Characteristics:** - Good castability with proper foundry practices - Pattern shrinkage: 20-25 mm/m - Low hot tearing tendency - Suitable for complex geometries **Machining:** - Good machinability in solution annealed condition - Work hardens rapidly during machining - Use positive rake tools and rigid setups - Recommended cutting speeds: 20-35 m/min (65-115 SFM) **Welding:** - **Weldability:** Excellent - **Preheating:** Generally not required - **Interpass Temperature:** Maintain below 150°C (300°F) - **Filler Metals:** E316 or ER316 - **Post-weld Heat Treatment:** Generally not required --- #### **10. Quality Assurance & Testing** - **Chemical Analysis:** Per applicable standards - **Mechanical Testing:** Tensile and impact tests - **Hardness Testing:** Multiple location verification - **Non-Destructive Testing:** - Radiographic examination - Liquid penetrant examination - **Corrosion Testing:** Optional per requirements - **Certification:** Full traceability with test certificates --- **Disclaimer:** This technical datasheet provides general information for reference purposes only. UNS J92900 stainless steel requires proper heat treatment to achieve optimal properties. The material's performance may vary based on specific service conditions, casting design, and manufacturing processes. Always consult relevant standards and qualified materials engineers for critical applications. -:- For detailed product information, please contact sales. -: Cast Stainless Steel CF8M, UNS J92900 Specification Dimensions Size： Diameter 20-1000 mm Length <4194 mm Size:We can customized as required Standard： Per your request or drawing We can customized as required Properties（Theoretical） Chemical Composition -:- For detailed product information, please contact sales. -: Cast Stainless Steel CF8M, UNS J92900 Properties -:- For detailed product information, please contact sales. -:

Applications of Cast Stainless Steel Flange CF8M, UNS J92900 -:- For detailed product information, please contact sales. -: Chemical Identifiers Cast Stainless Steel Flange CF8M, UNS J92900 -:- For detailed product information, please contact sales. -:

Packing of Cast Stainless Steel Flange CF8M, UNS J92900 -:- For detailed product information, please contact sales. -: Standard Packing: -:- For detailed product information, please contact sales. -: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and Steel Flange drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 665 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition